Results 1 to 7 of 7

Thread: Cannot open new installation of bibleworks 10 (two tries at installing)

  1. #1

    Default Cannot open new installation of bibleworks 10 (two tries at installing)

    Is it possible for the flash drive for Bibleworks 10 to get corrupted? Bibleworks 10 was installed and working yesterday. I had several Bibleworks windows open, and maybe that caused a problem. The program later would not open. I tried to repair it to no avail. I uninstalled it and reinstalled it, turning off the virus detection. It would not open. I have gone through the process again, and it still will not open. The Bibleworks icon displays but then disappears, and that is it. I tried several of the options to get the program to work. One was to edit the BW1000.INI file, and the computer told me that it could not find that file. I know this is an important file, so what should I do, please, to restore it or enable the computer to find it? I am working with Windows 10.

  2. #2
    Join Date
    Jun 2018
    Posts
    15

    Default Try the ISO file (contact Mike)

    Hello Harold. I am mediocre in both IT in general and Bibleworks specifically, so hopefully others will chime in as needed. As I understand it, flash drives can fail -- but if that were the case, you wouldn't have been able to reinstall from it, I think.

    Your activation code(s) should work for both a flash drive installation or installing from a downloaded ISO file. If you have the bandwidth, I would suggest trying the ISO file. However, I'm not sure how you access that now. I thnk you need to send Mike Bushell a private message to get a link for downloading it (I believe that is the current process due to extensive pirating activity).

    Hope you get it back up and running soon!
    David

  3. #3

    Default

    I don't think the original flash drives will work. I think you have to install it from the downloaded file. Installing from that file will allow you to use your codes. At least it did for me. The ISO download is still on the main web site, but it is very large.

  4. #4
    Join Date
    Jun 2018
    Posts
    15

    Default Oops, ok don't contact Mike

    Quote Originally Posted by Chas View Post
    The ISO download is still on the main web site, but it is very large.

    Just go to bibleworks.com and scroll down to Downloads section. I had to use a download manager to download (don't remember which one). One that has been recommended here is https://www.freedownloadmanager.org/

    You can also go to the Knowledge Base and search for "download manager" to see other suggestions.

    David

  5. #5
    Join Date
    Apr 2019
    Posts
    1

    Default ISO download not working

    Found this thread and happy to see this forum is still active! I'm trying to download the ISO here: https://bibleworks.com/dd/bw10_iso.php.

    I have my activation key, it checks out; the page says:
    Your code was verified. Please follow the instructions in the next section.

    In the place that generates the URL, it says:
    If you are using a download manager, the link for your download is
    Couldn't get download link.
    Copy this link to your download manager.
    Similarly, the link at the end is no good.

    I don't suppose anyone on this board has a copy of the ISO and can privately share the link?

  6. #6
    Join Date
    Apr 2022
    Posts
    3

    Default Follow=up on "Cannot open new installation ..."

    Quote Originally Posted by Harold Holmyard View Post
    Is it possible for the flash drive for Bibleworks 10 to get corrupted? Bibleworks 10 was installed and working yesterday. I had several Bibleworks windows open, and maybe that caused a problem. The program later would not open. I tried to repair it to no avail. I uninstalled it and reinstalled it, turning off the virus detection. It would not open. I have gone through the process again, and it still will not open. The Bibleworks icon displays but then disappears, and that is it. I tried several of the options to get the program to work. One was to edit the BW1000.INI file, and the computer told me that it could not find that file. I know this is an important file, so what should I do, please, to restore it or enable the computer to find it? I am working with Windows 10.
    Dear Mr. Holmyard, I am having a similar difficulty. I realize your thread is from a few months ago. Have you been able to resolve your problem? I have started a new thread yesterday, April 4, 2022. I do not know if you are able to respond any further. Thank-you.
    Thomas AC

  7. #7
    Join Date
    Apr 2022
    Posts
    1

    Default

    i think you should try to install the program techzpod mobdro download
    Last edited by atayzop; 05-07-2022 at 06:51 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •