Results 1 to 10 of 10

Thread: Splash screen stays on and occupies processor

Hybrid View

  1. #1
    Join Date
    Apr 2004
    Posts
    181

    Default Splash screen stays on and occupies processor

    I have noticed this problem on my system for a while. The solution, which I haven't taken the time to do, is probably uninstall and re-install. But just in case it is a common problem, I post this for narrowing down the cause.

    Win XP home SP2, BW7, some Norton stuff, 1 Gb ram, plenty of hard drive space.

    First time I run BW7 from Start Menu after turning on, BW splash screen stays on even after BW comes up behind it. Processor is 100% loaded. When I can get BW to close by using the window close button (top right) or the File/Exit menu, I can restart BW a couple seconds later and it comes up just fine--splash screen splashes and then disappears. Also, I've found if I can use the BW program and redraw that particular area of the screen, then once the whole splash screen has been drawn over, the processor usage immediately drops from 100% usage to idle levels and program is fine.

    Any one else run into this? Or have a simple solution?

  2. #2

    Default

    Same happens to me.

    Roel S.

  3. #3

    Default

    Hi,
    This happened to me until I disabled the splash screen, now I have no problems.

    Peace
    D
    Duncan Forbes
    New Life Church, Roehampton, London
    www.newlifelondon.com
    www.duncanf.blogspot.com

  4. #4
    Join Date
    Mar 2006
    Posts
    10

    Default

    Go to Tools/Options. Under "Option Flags" you'll see "Startup Options." Uncheck "Show splash screen at startup." That should take care of it.

    Alan

  5. #5

    Default

    Thanks! This has been a problem for a long time. I thought it was unique to my system. It's great to have such an easy solution.

    Tom

  6. #6
    Join Date
    Apr 2004
    Posts
    181

    Default No splash screen-still sometimes goes to 100% processor usage

    I've turned off my splash screen, but still only about half the time do I get a clean, fast startup. Other times, the browse window is white and the analysis window is white. If I keep clicking on things that are hidden under the white, when the last thing (scroll bar, analysis header, etc.) displays then the processor usage drops to nil. I have seen a time or two where the correct screen displays for a second and then a redraw takes place and leaves the white areas and my processor goes to maximum usage.

    Anyone else had this problem?
    (Just looking for possibilities or similarities before contacting support.)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •