EdMellott
01-30-2007, 11:53 AM
To improve system security of a PC running Windows, Windows Vista has introduced User Account Control. For BibleWorks, this means that some settings changes are needed to enable the ability to perform periodic updates. For BibleWorks 6 and 7 (revision A01), these settings changes are accomplished by applying the corresponding BibleWorks VistaFix file.
For those who have purchased BibleWorks 7 Revision A02, no additional patch is necessary. The program installs fully compatible with Windows Vista. (Check the face of Program Disk 1 of the BibleWorks installation set to determine which revision set you have.)
For BibleWorks 4 and 5, as well as non-English language versions of Windows, one will need to make the changes manually to the folder properties of the BibleWorks version installed. (See the FAQ "How Can I Run BibleWorks Version 4 or 5 in Windows Vista (http://www.bibleworks.com/forums/showthread.php?t=2331)?" for detailed instructions.)
To apply the VistaFix patch, take the following steps:
1. First, install BibleWorks to the computer running Windows Vista.
2. When installation is complete, restart Windows.
(Remember, once Windows has restarted, do NOT run BibleWorks as yet. If BibleWorks is opened in Vista before the patch has been run, it will be necessary to uninstall and reinstall BibleWorks again.)
3. Download the VistaFix zip file from the BibleWorks webpage
For BibleWorks 7, revision A01: Click Here (http://www.bibleworks.com/vistafix/BibleWorks%207%20Vista%20Fix.zip)
For BibleWorks 6: Click here (http://www.bibleworks.com/vistafix/BibleWorks%206%20Vista%20Fix.zip)
4. Extract the VistaFix file to an easy to access location, such as the Windows desktop.
a. Click with your right mouse button on the downloaded file.
b. Choose Extract All... from the pop-up menu.
c. Follow the prompts to extract the folder to your desired location.
5. Open the folder containing the VistaFix patch file, then double-click the file to execute it
6. Follow the prompts that occur as follows:
a. Open File - Security Warning - Choose RUN.
b. User Account Control - Choose CONTINUE.
c. Welcome to the BibleWorks X.0 Vista Upgrade Patch - Choose NEXT.
d. The Setup Status box will display. No action required.
e. InstallShield Wizard Complete - Choose FINISH
f. Restart Windows again.
7. After running the patch and restarting Windows, run BibleWorks. Note the version number on the splash screen. (You can also open HELP > ABOUT BIBLEWORKS to see this information.)
8. Run the BibleWorks Updater by clicking HELP > BIBLEWORKS ON THE INTERNET > CHECK FOR UPDATES. (This differs slightly in BibleWorks 6.)
9. Scan the list of updates to find one named BibleWorks Executable, and place a checkmark in its box.
a. Note the version number for it. (It will begin with a single digit, that is, a 7, followed by a period, then four more digits and a letter.)
b. Do not select other patches at this time; save those until after step 12.
10. Click the APPLY SELECTED UPDATES button.
11. Note, once again, the version as BibleWorks opens. The last part of the version number should correspond to the update selected above in step 9.
a. In the updater list, the version may appear as 7.019b or the like, while the version number that displays when the program starts may be 7.0.019e.8 or later.
b. If the selection chosen were 7.019b, but after applying and restarting, the version showed as something earlier, 7.0.016 for example, then the updated executable was not applied, and something has not been correctly configured.
12. If the version number is the same, the patch has succeeded. You may now apply other patches, as desired.
Last Updated: ELM/August 13, 2008
For those who have purchased BibleWorks 7 Revision A02, no additional patch is necessary. The program installs fully compatible with Windows Vista. (Check the face of Program Disk 1 of the BibleWorks installation set to determine which revision set you have.)
For BibleWorks 4 and 5, as well as non-English language versions of Windows, one will need to make the changes manually to the folder properties of the BibleWorks version installed. (See the FAQ "How Can I Run BibleWorks Version 4 or 5 in Windows Vista (http://www.bibleworks.com/forums/showthread.php?t=2331)?" for detailed instructions.)
To apply the VistaFix patch, take the following steps:
1. First, install BibleWorks to the computer running Windows Vista.
2. When installation is complete, restart Windows.
(Remember, once Windows has restarted, do NOT run BibleWorks as yet. If BibleWorks is opened in Vista before the patch has been run, it will be necessary to uninstall and reinstall BibleWorks again.)
3. Download the VistaFix zip file from the BibleWorks webpage
For BibleWorks 7, revision A01: Click Here (http://www.bibleworks.com/vistafix/BibleWorks%207%20Vista%20Fix.zip)
For BibleWorks 6: Click here (http://www.bibleworks.com/vistafix/BibleWorks%206%20Vista%20Fix.zip)
4. Extract the VistaFix file to an easy to access location, such as the Windows desktop.
a. Click with your right mouse button on the downloaded file.
b. Choose Extract All... from the pop-up menu.
c. Follow the prompts to extract the folder to your desired location.
5. Open the folder containing the VistaFix patch file, then double-click the file to execute it
6. Follow the prompts that occur as follows:
a. Open File - Security Warning - Choose RUN.
b. User Account Control - Choose CONTINUE.
c. Welcome to the BibleWorks X.0 Vista Upgrade Patch - Choose NEXT.
d. The Setup Status box will display. No action required.
e. InstallShield Wizard Complete - Choose FINISH
f. Restart Windows again.
7. After running the patch and restarting Windows, run BibleWorks. Note the version number on the splash screen. (You can also open HELP > ABOUT BIBLEWORKS to see this information.)
8. Run the BibleWorks Updater by clicking HELP > BIBLEWORKS ON THE INTERNET > CHECK FOR UPDATES. (This differs slightly in BibleWorks 6.)
9. Scan the list of updates to find one named BibleWorks Executable, and place a checkmark in its box.
a. Note the version number for it. (It will begin with a single digit, that is, a 7, followed by a period, then four more digits and a letter.)
b. Do not select other patches at this time; save those until after step 12.
10. Click the APPLY SELECTED UPDATES button.
11. Note, once again, the version as BibleWorks opens. The last part of the version number should correspond to the update selected above in step 9.
a. In the updater list, the version may appear as 7.019b or the like, while the version number that displays when the program starts may be 7.0.019e.8 or later.
b. If the selection chosen were 7.019b, but after applying and restarting, the version showed as something earlier, 7.0.016 for example, then the updated executable was not applied, and something has not been correctly configured.
12. If the version number is the same, the patch has succeeded. You may now apply other patches, as desired.
Last Updated: ELM/August 13, 2008