PDA

View Full Version : BW 6 loads slow from a NetWare server



c102ta
05-12-2004, 05:12 AM
Hello,

For technical reasons we installed the BW program files on a Novell NetWare server. In this configuration, BW needs about 2 minutes to start which is quite long if you have to wait for it ...
With a network packet sniffer we found that BW reads its configuration (mainly *.DBU, *.DBX and BOOKS.BNA) in one-byte-packets. This is no problem on a local hard drive with its caching mechanisms but on a network this generates a lot of overhead and causes this bad behaviour at startup even with very good network and server components.
Is there any chance for an improvement?

Thanks in advance,
Andreas Tranquillini
University of Innsbruck, Central IT Services